Bộ chuyển mạch ngõ ra KNX 1-10V 10Ch X 16A Switch Dim Actuator – SMP SD110 EAE S-KNX

KNX 1-10V 10Ch X 16A Switch Dim Actuator

10 independent channels that can be parameterized via ETS4/ETS5

Manual operation feature for each channel using membrane switches

Each channel can actualize any of these functions separately

Following function list provided;

Configurable behaviour after voltage return, voltage failure or ETS download

Integrated relay on each channel for complete switch off

Does not require an additional power supply

Type of protection	IP 20	EN 60 529
Safety class	II	EN 61 140
Power supply :	- Voltage	21V… 30V DC, SELV
Power supply :	- Current consumption	≤ 10 mA
External supply	-	-
Connections	- Screw terminals	0,5…3,31 mm² solid and stranded wire
		0,5…3,31 mm² stranded wire with ferrule
		0.5 Nm
	- Max tightening torque
	- KNX	Bus connect terminal
Output	- Number	10 output, passive
	- Signal	0-10V / 1-10V DC for dimming control
	- Cable length	max. 200 m
	- Maximum switching power	4000 VA
	- Mechanical life	> 1 x 106
Load supply circuit outputs	- Switching voltage	250 VAC; 50/60 Hz
	- Switching current	16/12 AX
	- Switching capacitance	200 µF
Type of contact	- Potential-free, bistable
Installation	- 35mm mounting rail	EN 60 715
Operating elements	- LED (red) and button	For physical address
Temperature range	- Ambient	-5° C + 45° C
Temperature range	- Storage	-25° C + 55° C
Humidity	- max. air humidity	85 % no moisture condensation
Dimensions	66 x W x 90mm
	Width W in mm	179 mm
	Width W in units (18 mm modules)	10 modules
Weight	0,5 kg
Box	Plastic, polycarbonate, colour grey
CE	In accordance with the EMC guideline and low voltage

KNX 1-10V 10Ch x 16A Switch Dim actuator – RCU (10 OUTPUT )