Cổng kết nối KNX DA110 Dali Gateway 64 Ballast Individual Control

Thông tin KNX DA110 Dali Gateway 64 Ballast Individual Control

DA100 KNX-DALI Gateway operates between KNX and DALI bus. DALI power supply is integrated in the device. DA110 differs from DA100 by its ability to individually control each DALI load. DA110 is compliant with IEC 62386 standard.

Thông số kỹ thuật

Protection Grade IP 20 EN 60529

Safety Class II EN 61140

KNX Supply(4) Voltage

Current consumption

21 – 30V DC, SELV

< 10mA

Mains Supply(6) Voltage

Power consumption

Current consumption

85 – 300V AC @ 50-60Hz

Max. 8W

100mA @ 85V AC

DALI Supply(5) Voltage

Current

16V DC typical

Max. 200mA

Connections Screw terminals

Max tightening torque

KNX terminal

0,05 – 2,5mm2 solid wire

0,03 – 1,5mm2

stranded wire

0.5Nm

Red – grey bus connect terminal

Output Number of DALI devices Cable lengths “Max. 64 (include max. 8 sensor)

1.5 mm2 Max. 300 m

0.75 mm2 Max. 150 m

0.5 mm2 Max. 100 m”

Installation 35mm mounting rail EN 60715