Thiết bị ngõ ra Fancoil Control (Fan Coil Actuator KNX FCA 100)
12.000.000 ₫
Thiết bị dùng để điều khiển các chức năng Fa Control Unit của hệ điều hòa không khí
Tư vấn mua hàng: 0903.883.398
| - Hàng chính hãng mới 100% | - Lỗi kĩ thuật đổi sản phẩm mới |
| - Hỗ trợ trong quá trình sử dụng | - Ship trong nội thành siêu tốc |
Fan Coil Actuator FCA100 covers HVAC systems of the electrical installation of room applications and offers following functions in one product.
- Controlling fan coils (2 & 3-point valve)
- Additional Heat or Cooling
- Switching auxiliary load
- Dry contact inputs
- Temperature inputs
FCA100 has 11 outputs, 6 inputs inside. These outputs and inputs are using for:
- Auxiliary Output x1 (Relay 16A)
- Fan Speed Output x3 (Relay 16A)
- Fan Speed Output x1 (0-10 V Signal)
- Valve Control Output x4 (Triac 0.5A)
- Valve Control Output x2 (0-10 V Signal)
- Dry Contact Input x4
- NTC Sensor Input x2
Suitable for switching resistive, capacitive and inductive loads as well as fluorescent lamp loads according to EN 60 669.
- Any kind of load (up to 16A per channel)
Manual control is possible for each channel through the built-in button panel.
Device has 4 independent input channels. Input channel operates as well as universal interface with following functions,
- Switch / push button sensor
- Dew-point sensor
- Window sensor
Device has 2 temperature input channels separately. Temperature Inputs can be used with following functions,
- Single
- Weighted (Multi temp sensor)
220V auxiliary power is not required.
Thông số kỹ thuật
Type of protection IP 20 EN 60 529 Safety class II EN 61 140
Power supply : – Voltage 21V… 30V DC, SELV
– Current consumption ≤ 10 mA
External supply – – Connections – Screw terminals 0,5…3,31 mm² solid and stranded
wire
0,5…3,31 mm² stranded wire with
ferrule
– Max tightening torque 0.5 Nm
– KNX Bus connect terminal
Outputs – Number 11 output
Triac
– Non-floating Yes
4 for
Heating/Cooling
Valve
– Rated Voltage 250 V AC; 50/60 Hz – Rated Current 0.5 A
– Short-Circuit Protection Yes
Relay
– Switching voltage 250 V AC; 50/60 Hz 1 Aux + 3 Fan
Speed
– Switching current 250 V AC 16A / AC 1 – Switching current 250 V AC,
capacitive loads 16A (200µF)
– Maximum switching power 4000 VA
– Mechanical life > 1 x 106
0-10 V
– Current Limit 1.40mA 1 Fan Speed + 2
Valve
– Signal 0…10V DC – Source/Sink Source
Inputs – Number 6 Inputs
Generic Input
– Scanning Voltage (for binary input) 5 V pulsed 4 Input
– Current (for binary input) 1 mA – Cable length < 300 m
Temp. Input – Sensor Type NTC 2 Input
Installation – 35mm mounting rail EN 60 715 Operating
elements
– LED (red) and prg. button ———-à
– Manual Button ———————–à
– Sel. Buttons —————————à
– ON / OFF Buttons ——————–à
– Switch Button ————————-à
For physical address
Switching to manual mode
Fan speed and HVAC mode change
Switching Valve ON / OFF
Auxiliary Output Control
Temperature
range
– Ambient -5° C + 45° C
– Storage -25° C + 55° C
Humidity – max. air humidity 85 % no moisture condensation Dimensions 66 x W x 90mm
Width W in mm 108 mm
Width W in units (18 mm modules) 6 modules
Weight 0,395 kg Box Plastic, polycarbonate, colour grey
Related products
